ReActive Adaptations is now a dealer for Easy Load Trays.
Here are the trays we think you might like:
Easy Load Tray w/3 Ramps (ELT-3R)
- This is a fold-up tray with a steel center main tube for added capacity and 3″ channels
- Comes with three (3) ramps, 5’ long, 2” tall and 3” wide.
- 4 pin flat electrical connection unless customer would like 7-pin round slotted connector
- $1,264 not including shipping
Easy Load Tray-XL w/3 Ramps (ELT-XL3R)
- This is a fold-up tray with a steel center main tube for added capacity and 3″ channels
- Comes with three (3) ramps, 5’ long, 2” tall and 3” wide.
- 4 pin flat electrical connection unless customer would like 7-pin round slotted connector
- $1,389 not including shipping.
****Please note shipping can range from $75 to $100+ depending on the shipping destination. A better estimate can be provided once we have your address.
Notes from the manufacturer:
- All Easy Load systems are designed to work with a 2” receiver hitch. However for either of the three ramp systems a 1.25” receiver hitch may be adapted to a 2” Receiver Hitch Inserts as there is very little if any motion forces on the vehicle receiver hitch.
- The trike transporting vehicles 2” receiver hitch must have a ground clearance or 16”.
- The ELT comes with running and brake lights as well as turn signals. Power to the lights is supplied through either a flat four pin or a round seven blade connector. Easy Load will install either so as to match the trike transporting vehicle.

